From the sketches and gibberish in the first photo, all I needed was a cut sheet. Then I could start making these drawers. After doing the long math probably two or three dozen times for kitchen cabinets, bathroom cabinets, and furniture I had an idea! Mr Jon Dusza from Dusza Media was kind enough to confirm that using HTML was the easiest way to accomplish what I needed. (More on this later……)
With cut list in hand I cut all the parts to length and width, then cut the dado in each drawer part to receive the drawer bottoms. At that point I put them in piles and set them up in the following jig to start cutting the dovetails.
The final product are these 7 different drawers: